LAUNCH X431 PRO3 S+ Diagnostic Scan Tool, with Smartlink HD Heavy Truck Supports ECU Coding 37+ Reset HD Trucks Scan, All System Diagnostic scanner, VAG Guide AutoAuth FCA SGW, CANFD DOIP 2 Years Free Update

LAUNCH X431 PRO 3S +Smartlink HD Highlights:

【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/ Trucks/ buses/ trailers/ excavators/diesel engine/pick-up/etc.

【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.

【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.

【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.

【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP. 

LAUNCH X431 PRO 3S +Smartlink HD Functions:

1. ALL SYSTEM SCANNER FOR 200+ CAR BRANDS,ECU CODING,60+ RESET, CARS & TRUCKS FULL CONNECTOR KITS

• OE-LEVEL ALL Systems Diagnostics

LAUNCH X431 PRO3S+Smartlink HD 2.0 support read&clear DTCs, read live data stream and perform active test and services functions for ALL modules of 99% of cars&Trucks on the road and does so to OE levels. Rather than using separate OE diagnostic tools, the Launch scanner LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 helps you increase efficiency and control costs. The systems include but are not limited to:

PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more…

Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more…

BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, ABS ESP system, Air Condition. Electric Windows, and more…

Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System,and more…

• Intuitive Topology Mapping

Display each module's status and the number of DTCs in one page

Show real communication structure of all ECU module, easy to understand wiring schematics for cars

Tap to enter the systems or modules with fault codes

Zooming in and out to check the color coded modules

Visualizes the car systems with a diagrammatic tree, shows the system normal,faulty and not equipped by diagnosing the whole system.

Intuitive Use Topology Mapping show the structure of communication between modules,and checks all system conditions with One-Click

Locate the fault in a second show different health status in different colors.

2. DEALER-LEVLE ECU CODING & CODING WITH J2534 TOOL

• ECU CODING: Online Coding/ Matching/ Calibration/ Relearn/ Personalization/ Retrofit/ Customization

Online Coding: this LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.

Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.

Component Matching: Matching,relearn ,Cali-b-ration, or initia-lization adaptive data for certain components after repair or replacements,such as: suspension cali-bration ,seat matching ,sunroof initia-lization,gearbox matching,injector cali-bration, transmission adap-tion.Delete Adapt-ation Data, Tank Cali-b-ration,Height sensor system cali-bration,PSM Sensor Cali-b-ration ,etc.

Re-trofit/ Modi-fication: for example, re-trofit battery with different type, Upgrading the headlights, taillights, and interior lighting to LED lights,etc.

Refresh the hidden features: for example,disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode,delete transmission adaptive value.setting speed limits,etc.

J2534 Tool: Pairing with the SmartLink C V2.0 device (serving as J2534-Compliant VCI), you can operate a PC or LAUNCH X431 PRO3S+SmartLink C diagnostic tool to download OEM software and install J2534 files from LAUNCH official website, to perform the J2534 for some vehicles. 

Note: Reach us to get the J2534 Operation manual. Supports the following diagnostics communication protocols: CAN/ CAN_PS/ FT_CAN_PS/ SW_CAN_PS/ FT_ISO15765_PS/ ISO15765/ IS015765_PS/ SW_ISO15765_PS/ISO14230/ISO14230_PS/ISO9141 /ISO9141_PS/ J1850PWMJ1850PWM_PSIJ1850VPW/ J1850VPW_PS/ FD_CAN_PS/ FD_ISO15765_PS .

Au-di /V-W Firmware Protection Cancel Features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.

(PMI) Module Installation: Support PMI function,Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initia-lize a module.No need using the J2534 or buying a subscription.

• Bi-directional Control: ( ACTIVE TEST )

For cars: Injector Buzz Test/Idle Speed Adjustment/Window/Mirror/Door test/Pump and Valve tests/Fuel Pump/Solenoid valve ,tank Ventilation/Switch/cylinder correction off/on/E.GR test/EVAP test/A/C Compressor Activation/Turn on the radiator fan/Modulate the throttle/cycling the a/c/clutch on and off/Acceleration Device Test,etc .(vary by car model,year)

For Heavy duty Trucks: Cylinder cut-out test/compression test/injector volume commands/injector coding/S.CR commands/rail high pressure test/S.CR catalyst regen/Cylinder balance test/D.PF regen/VGT calibrations/S.CR commands/Aftertreatment reset/Parameter changing/glow relay activation check/reset the D.P.F filter,etc.(vary by car model,year)

Power balance Test: Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem. 

Note: All above are not available for some specific car models. Reach us for details.

3. SUPPORT 60+ KINDS OF MAINTENANCE FUNCTIONS (VARY BY CAR MODEL ,YEAR)

1. Oil Lamp Reset Service: perform reset for a new calculation of Engine Oil Life system once changed the oil.

2. EPB Reset: Help replace and reset the brake pad.

3. BAT battery service(BMS): Clear the fault information of low battery and make it match again

4. D.P.F service

5. SAS Steering Angel Sensor Reset: Reset the steering angle to zero to keep the car running straight.

6. ABS Bleeding: Help exhaust the air.

7. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.

8. TPMS service: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

9. Throttle Adaptation: Initialize the throttle actuators to the default state.

10. AFS Headlamp Reset: Initialize the adaptive headlamp system.

11. Sunroof Initialization: The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

12. Suspension Reset:Adjust the vehicle body height sensor for level calibration.

13. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.

14. Gear Learning: Monitors certain camshaft position sensors signals.

15. Tire Reset:Set the size parameters of the modified or replaced tire. 

16. A/F Reset:Set or learn Air/Fuel ratio parameters.

17. Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

18. Coolant Bleeding: Activate the electronic water pump. 

19.Language Change: Change vehicle system language.

20. Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.

21.Stop/Start Reset: Set up the automatic start-stop function in ECU

22. Seat Calibration: Calibrate the memory in replaced or repaired seats.

23. Transport Mode: Deactivate the transport mode.

24. Windows Calibration: Perform door window matching to recover ECU initial memory.

25. AC System Relearn/Initialization.

26. E.GR Reset.

27. Reset Fuel Alcohol Level.

28. Reset Fuel Trim

29. High Voltage Battery Diagnostics.

30. GPF Regeneration.

31. Camshaft/Crankshaft Sensor Relearn

32. Interactive Vehicle Dynamics (IVD) Initialization Sequence.

33. Fuel Economy Test

34. Halt/Resume Transmission Adaptive Learning. 

35. Passive System(PATS)Functions.

36. Relearn Vehicle Data.

37. Initialisation Of Automatic Tailgate

38. Initialise Power Window Regulators

39. Seat Standardisation

40. Normalise Slide/ Tilt Sunroof;

41.Activate Contactless Vehicle Access

42. Block And Enable Remote

43. Power-Down Command

44. Autoaddressing Ambient Light BDC.

45. Unloc king Auxiliary Heater

46. Drain/ Fill The Refrigerant Circuit

47. Installation Position Of Flap Motors

48. ETS Test Of Lithium lon Battery

49. Register Battery Exchange

50. Reset Adaptation Values

51. Adjusting The Electromotive Throttle Controller

52. Injection Quantity Compensation

53. Open And Close Radiator Blind

54. Activate/Deactivate Workshop Mode

55. Start-Up For Brake Pedal Travel Sensor .etc.>>>>

Note: (depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

Level-up Functions added in 2024:

1. V.A.G Guided Functions for Au-di, Volks-wagen Skoda and Seat,etc :

On-Screen Instruction step by step , LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don’t need to reply on a mechanic’s suggestion all the time.

2. ADAS Calibration:

Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

3. FCA AUTOAUTH :

With the new version on LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 , you will have access to the security gateway module on 2017 and newer Fiat/ Chrysler/ Dodge/ Jeep vehicles(2017-2024), so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even (pulls PIN & write), ADAS calibration assistance etc.

4. DTC Help & Google Search:

Just one click "DTC Help"or Code Search"after the DTC shows, save time by putting one by one.

5. 12-In-1 Live Data Stream Graphing&Export Data as CSV/PDF File: 

Provides very detailed data stream data, it could include the change of Accelerator Pedal Position Sensor , Actual Output Shaft Speed , Clutch A Actuator Motor , Vehicle Battery and so on. Graphical data allows you to analyze the data changes of each module more clearly and easily, and it is easier to see the problems in it,CSV/PDF file allow you save the data,easy to record and track the vehicle performance.

6. Tons of Online Maintenance Resources:

Including How-to Videos, operation skills, DTC Guidances, and user manual, Q&A, Quick start guide, etc,show you how to use diagnostic tool to solve common faults of some models, such as resetting BMW brake warning lights.

7. Remote Diagnosis &Feedback:

When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.

8. Diagnostic Report Print&Share:

With Launch X431 PRO3+ ,you can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card.

9. (PMI) Module Installation : 

LAUNCH X431 PRO3S+ SMARTLINK HD 2.0 Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription

10. Auto VIN Scan: 

5 Ways for quick diagnose included 1)AUTO -VIN SCAN 2)CAMERA VIN 3)Manually Input VIN 4)Select Area and Vehicle- Automatic Detection 5)Select Area and Vehicle- Manual Selection