XGecu T56 Universal Programmer +51 Adapters for SPI NAND Flash/EMMC

通常価格 $305.00
セールスプライス $305.00 通常価格
単価
を節約します
比較する 質問する

質問する

* 必須フィールド

サイズガイド 共有
  • Express Estimated Delivery:Dec 21 - Dec 25

  • Free Shipping Method: Estimate dilevery 8-19 business days

Guarantee safe & secure checkout

22 people are viewing this right now
XGecu T56 Universal Programmer +51 Adapters for SPI NAND Flash/EMMC

XGecu T56 Universal Programmer +51 Adapters for SPI NAND Flash/EMMC

Description
Return & Warranty

XGecu T56 Universal Programmer +51 Adapters 24/25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM

XGecu T56 Programmer 56 pins Super stability Low power consumption high speed and high voltage programming

XGecu T56 universal programmer product description

XGecu T56 Programmer Highlights:

1. The software interface is clear, smooth and easy to use. more functions. easy to upgrade software .

2. Ultra-high cost performance, suitable for small batch programming below 5000 , also suitable for developers and professional maintenance personnel.

3. Support chip model: 24/25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM,FLASH memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc.

4. Support package: add DIP42/ PLCC44/ SOP44/ QFP44/ TSOP48/ TSOP56/ BGA48/ BGA63/ BGA64 / BGA100/ BGA153/ BGA162/ BGA169/ BGA221 on the basis of TL866II.

5. NAND EMMC supports maximum capacity up to 256G.

6. Support high voltage, the highest voltage reaches 25.0V:

  • The T56 programmer solves the contradiction between high voltage and high frequency pins. It supports high speed and high voltage programming.
  • You can directly program many 27C series and MCU series that require high voltage VCC (6.5V) and VPP (12V-25V).

7. High-performance with Optimal design of software and hardware:

  • For high-capacity chips, the T56 programmer meets or exceeds the speed of most specialized programmers.
  • Stability and reliability of the programmer are the most important .

         If the main controller of the programmer can work at a higher speed, its stability and speed determined by the highest operating frequency supported by the pins. The higher frequency, the better of anti-interference ability.

  • The T56 pin tested with the frequency is as high as 70MHZ. The pin operating frequency is more than 3 times that of many similar programmers. This is the main reason why the T56 can work reliably at a very high speed for large-capacity high-speed chips.
  • T56 almost reaches the limit speed of USB2.0 (HS 480MHZ) transmission when reading EMMC large-capacity chip.

8. High-speed programming of a SPI NAND FLASH:

SPI NAND Flash has a wide range of applications in mobile devices, set-top boxes, data cards, TVs, etc. It is compatible with flash pins of different capacities and uses a smaller package (WSON8 is typical).

The function of SPI NAND:

  • Support OTP programming
  •  Support internal ECC on/off function
  •  Support UID (unique signature) reading
  •  Support multiple file operations
  •  Support NAND parameter custom function, (new chips can be added by custom parameters)
  •  Reserved custom interface to provide free technical support for bad block management and ECC algorithm. we can customize according to user requirements.
  • The programming clock speed is adjustable.
  • Support QUAD X4 or SPI X1 mode.
  • Support ISP  programming in X1 mode (ISP reaches 4M bytes/second).

SPI NAND is generally a chip of 1Gb-4Gb capacity. To read and write full data of 1Gb chip, T56 only needs 12s+13s=25 seconds.
More than 10 times the speed of some similar products.(High-speed programming without using a special adapter.)

XGecu T56 Programmer Functions:

1. Programming MT29F2G01ABAFD  with full datas. only 27S + 31S

XGecu T56 high speed programming

2. High-speed programming of a Parallel NAND FLASH:

Functions of Parallel NAND for Parallel:

  • Support OTP programming
  • Automatic Indentification supported by ONFI standard
  • Support UID (unique signature) reading
  • Support multiple file operations
  • Support NAND parameter custom function, (new chips can be added by custom parameters)
  • Reserved custom interface to provide free technical support for bad block management and ECC algorithm. We can customize according to user requirements.
  • The programming clock is adjustable.

Parallel NAND capacity can reach more than 256Gb, and the highest speed of T56 can reach 2-5 times the speed of some similar products.

XGecu T56 high speed programming

3. EMMC programming function special introduction:

The most functions EMMC programmer, which can perform one-key mass production operation on EMMC (also can be programmed with  4 machines in one computer)Load project files, load all parameter settings at once, and directly program. Read and write speeds up to 12MB / s-45MB / s.

EMMC function introduction:

Analysis function : analyze the content of the original chip, and display the following results:

  • Display chip manufacturing information
  • Visual display of chip usage up to 8 partitions
  • Each partition shows whether it is write protected, can be read, can be rewritten or deleted
  • Shows whether the entire chip is temporarily or permanently write protected
  • Show whether the chip is password protected
  • Show whether the chip uses a 32-bit security authentication code to write to the RPMB.
  • Show other important parameters of ECSD/CSD/CID

Read/write functions (all functions can be completed with one-key)

  • Read CID / CSD / ECSD.
  • Clear full-chip temporary write protection before programming
  • Clear temporary write protection groups before programming
  • Delete chip before programming
  • Blank Check the chip before programming
  • Programming 32-bit  authentication key
  • Perform chip password verification
  • Partiton Config
  • Read and Programming to BOOT1
  • Read and Programming to BOOT2
  • Read and Programming to RPMB
  • Read and Programming to GP1
  • Read and Programming to GP2
  • Read and Programming to GP3
  • Read and Programming to GP4
  • Read and Programming user data (User Area)
  • Setting  temporary write protection groups
  • Setting  permanent write protection groups
  • Setting password (or reset password)
  • Programming ECSD
  • Programming CSD
  • Automatically verify all the above operations after Programming

ISP in-circuit programming function:

  • Ultra-high stability ISP in-circuit programming, wire length can be up to 25CM, working frequency 25MHZ, reliable work, If the length is within 10CM, it can be operated at 40-50MHZ.
  • ISP can also use 4-bit mode, the operation speed is increased to 4 times.

EMMC other functions:

  • The working frequency and working voltage of EMMC can be adjusted manually.
  • The user area data can be read and written in multiple files.
  • If there is a password when Erase, will do Force Erase.
  • Password can use ordinary password or SHA1 encrypted password.
  • The value of ECSD / CSD can be loaded from the ECSD_CSD file or manually set by the user.
  • Ignore data CRC error during read operation.
  • Optional automatic verification after reading operation is completed.
  • The device information includes high-definition pin map and ISP wiring.
  • EMMC has real-time speed display during read and write operations, and the final average speed display.

EMMC Adapter and ISP connection:

XGecu T48 high speed programming

XGecu T56 high speed programming

4. High-speed programming of Parallel NOR Flash 28/29 series:

T56 can support up to 2Gb capacity of Parallel NOR Flash 28/29. and use one TSOP56 adapter.
Ordinary 48-pin programmer only support up to 256Mb and need 4 diffrent adapters.

EXAMPLE: S29GL128P11TFI01

XGecu T56 high speed programming

XGecu T56 Universal Programmer Parameters:

  • 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB2.0 HS 480MHZ transmission
  • 56 pin full drive IO design. All pins have a maximum operating frequency of 50MHZ and high reliability.
  • Stable and reliable 8Pins in-circuit programming interface, the wire Lehgth is more than 30CM,and it can communicate reliably at 25MHZ.

           25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ

  • VCC voltage 1.2-6.5V 64 levels adjustable,

          VPP voltage 6.5-25V 64 levels adjustable.
          IO communication signal voltage continuously adjustable 1.2V-3.6V
          VCC 120MA-320MA overcurrent protection continuously adjustable.
          VPP 120MA overcurrent protection.

  • Power consumption: 5V <500MA. All chips do not need external power supply.

          It can be connected to an external power supply 5V-5.5V 500MA for multipile programming.
          The external power can be powered by a cell phone charger can be seen everywhere.
          The programmer has multiple protections for the external power supply: overvoltage protection / reverse connection protection / overcurrent protection / low voltage prompt.

  • Write EMMC Speed: 12MB/s-25MB/s

          Reading EMMC speed: 14MB/s-45MB/s is 2-5 times faster than similar programmers. (This is important for large-capacity chips, 64GB EMMC chips, if 10MB/s (the average programmer cannot reach 10MB/s) reading takes 6400 seconds,T56 can usually reach more than 20MB/s, as long as about 3000 seconds)
         Ability to handle extremely high speeds, meaning that programmer hardware has greater stability at lower speeds.

  • Open self-test function, self-check each VPP/VCC /GND/IO

56 Pins FULL DRIVE:

  • Compared with the general 48-pin universal programmer, the 56-pin full drive has 8 more universal IO ports. The advantage of the 56 universal drives is that the all chips below 56 pins only need one adapter in the same package.
  • Example: A general TSOP56 adapter, which can program all  of TSOP56, TSOP48, TSOP40, TSOP32 on the T56 programmer. one TSOP56 adapter is equivalent to the function of five adapters of the ordinary 48-pin universal programmer.

XGecu T56 only need one adapter


Packing List:
1 * XGecu T56 universal programmer
1 * TSOP56/48/40/32 Adapter
1 * ADP-SSO-056-0.8  Adapter
1 * TSOP48 Adapter
1 * SOP44-DIP44 1.27mm (530mil) Adapter
1 * SOP28-DIP28 (300mil) Adapter
1 * SOP20-DIP20 (300mil) Adapter
1 * SOP16-DIP16 (300mil) Adapter
1 * Double SOP8-DIP16 CNV-SOP20 (208mil) Adapter
1 * SOP8-DIP8 CNV-SOP20 (208mil) Adapter
1 * SOP20-DIP20 CNV-SOP20 (208mil) Adapter
1 * SOP8-DIP8 CNV-SOP-DIP16 (150mil) Adapter
1 * SOP16-DIP16 CNV-SOP-DIP16 (150mil) Adapter
1 * PLCC44-DIP44
1 * PLCC44-DIP40
1 * PLCC32-DIP32
1 * PLCC28-DIP28
1 * PLCC28-DIP24
1 * PLCC20-DIP20
1 * SSOP28 to DIP28
1 * TSSOP8 to DIP8
1 * KB9012 board
1 * SOP8 IC Clip
1 * ITE 29/39/49/50 series 32/40/48 feet adapter
1 * Multipurpose ISP-DuPont-Header Adapter
1 * EC NPEC288 NPEC388 PCB Board
1 * TSOP28Pin 0.65mm Adapter Board
1 * SOP28Pin 1.27mm Adapter Board
1 * TSOP20Pin 0.65mm Adapter Board
1 * SOP20Pin 1.27mm Adapter Board
1 * TSOP16Pin 0.65mm Adapter Board
1 * SOP16Pin 1.27mm Adapter Board
1 * TSOP14Pin 0.65mm Adapter Board
1 * SOP14Pin 1.27mm Adapter Board
1 * TSOP10Pin 0.65mm Adapter Board
1 * SOP10Pin 1.27mm Adapter Board
1 * TSOP8Pin 0.65mm Adapter Board
1 * SOP8Pin 1.27mm Adapter Board
1 * QFN8-DIP8 Programador Adapter WSON8-DIP8 8x6mm 6x5mm
1 * SOP8/MSOP8/SSOP8/SOP16-DIP16 simple Adapter
1 * Adapter SOP8-DIP8 simples
1 * 1.8V Conversion Block 25 series low voltage chip adapter
1 * ICSP Cable
1 * LCD LED screen EDID Cable
1 * IC Chip Extractor
1 * Suction Pen
1 * USB Cable
1 * VGA Cable
1 * Anti-Static Wristband Wrist Strap Band ESD Discharge PC Electricity Grounding

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.

Package will ship out within 48 hours after payment receive usual, if there is some acceident, we will inform you by order contact information.

VXDAS Policy

1. Return Policy

2. Refund Policy

3. Repair Policy

4. Warranty Policy

 

Kindly note: 

Before returning items to us, please read and follow the instructions below. You can also contact our Customer Service, we will be glad to help you.

Please make sure that you understand our return policy and ensure that all criteria are met before physically sending any items back to us.

 

Return Policy

What Situation VXDAS Provides Return Policy?
  • Mis-Ordered Products: If you ordered wrong item by yourself, after communication with VXDAS sales you need to exchange a right item, you can return back and exchange the tool. But you need to pay both shipping cost to us and freight to you again.
  • Quality Issues: Our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our return policy will be open for you. 
  • Non Quality Issues: In some particular situation, our return policy can be open for you after our customer service learning your particular problem, and in this condition we will charge you 10% restock fee, please kindly understand.

What Situation VXDAS DO NOT Provides Return Policy?

  • Mis-Ordered Products: If you ordered wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this. 
  • Non Quality Issues: If the item is damaged by yourself, we can not provide exchange service for you. You can only return to repair.

 

How to Return the Items to VXDAS? 

After all details confirmed by VXDAS sales and agreed to return back the items, please help to follow the return process provided by VXDAS.

①Return Shipping Method

VXDAS will recommend to use Registered Mail or EMS to return the parcel, and please only send the items back to the shipping address our Customer Service provides. Please DO NOT use DHL/UPS/FEDEX/TNT or other courier for shipment without permission, if we cannot get the returned parcel with these methods, we will not responsible for that.

②Return Cost

If you were ordered wrong items and want to return back, you will bear the return cost. 

If it's quality problem and never use before, please contact VXDAS sales to confirm the cost.

If only return for repair or exchange, customer will afford the shipping cost to VXDAS according to company rule.

Remark:

①We promise to obey the return policy when the items have problems above, but you must send back the item after we knowing your problem and what you want us to do. Please kindly contact VXDAS Customer Service to confirm all details before returning the items.

②All return for refund or return for exchange should be done within 7 days. Customer must send out the items and provide returned tracking number with shipping invoice details to VXDAS sales. Otherwise, we may cannot receive the parcel and follow the return and exchange policy.

 

Refund Policy

What Situation VXDAS Provides Refund Policy?

  • Quality Issues: Our products do not work well once you receive it or it encounters crash in delivery causing customers fail to use it, in this situation, our refund policy will be open for you. 
  • Transaction Issues: If you find that the transaction was not completed by you/someone you know, please contact VXDAS Customer Service within 12 working hours to cancel the transaction and refund the unauthorized deduction. If over 48 hours, the parcel may send out already, then we have to refund after we get back the items.
  • Stock Issues: If product is out of stock, we will send email to check if you want to exchange or get refund.

 

What Situation VXDAS DO NOT Provides Refund Policy?

Mis-Ordered Products: If you ordered wrong item by yourself, or you found it is not what you want to order (not quality problem), our return policy is not applied for you, please aware of this.

Special Products/Services: Some products or services are not refundable after they have been provided. Like software download link, software installation service and account service etc.

 

When Can Get Refund?

Return for Refund:
Usually we will only refund to you after the returned item was received. Please also track the logistics after you send back the parcel and contact VXDAS sales for further refund information. (If returned product was not in good condition, we may charge you corresponding damage costs.)
Stock Issues:
If you prefer refund directly when item is out of stock, we will arrange refund to you in 48 working hours. Kindly check your account or contact VXDAS sales for refund details.

 

Repair Policy

In Warranty Time

All diagnostic tools and softwares from VXDAS is able to enjoy repair process for free in warranty time. 

If the items from VXDAS have quality problem during warranty, you can send back to us for repair. Return back please obey return policy or contact VXDAS Customer Service for more details.

 

Out Of Warranty

If item is out of warranty, there will be repair fee accordingly. You may also need to pay for the shipping cost when repair process finished. To avoid the problem of excessive maintenance costs, be sure to consult with the staff on specific issues.

Before sending back to repair, please explain the item problem to VXDAS sales, we will check it accordingly once received.

 

Warranty Policy

One Year Warranty

All diagnostic tools and softwares from VXDAS will have one year quality warranty period. 

During warranty time, customer can enjoy free technical support and repair. 

Before shipping out, all goods will be test by vxdas.com. Our test engineer will check for quality, including check the basic function of the hardware and software, the appearance, the packing, the necessary accessories and power adapter plug standard. 

 

7 Days Return

If the product has quality problem, VXDAS guarantees to replace a faulty product or full refund after receiving the products in 7 days. 

 

Lost Products

If products get lost in delivery, or you haven't received your item for a long time, please contact our customer service timely. We will deal with this ASAP. Please do not deal with it all by yourself, we will help to check and provide solution. Usually we will provide tracking number and tracking link timely. If products get lost on the way and we'll get messages from couriers, then VXDAS will contact you for further solution like resend the parcel or refund. 

 

The Warranty Policy fits for all products except some products which state the warranty specially in description. Like some chips, it doesn't have any warranty after order. Hope you can understand.

 

VXDAS Kindly Note
When you have any problems, please kindly contact VXDAS sales to provide pictures or videos to show the quality or appearance problem. 

According to the different problems, the VXDAS Sales will be responsible for providing the best solutions under the agreement of both parties, such as replacement, refund, discount for next order etc.

 

The Warranty Policy fits for all products except some products which state the warranty specially in description.

we understand that choosing the right product is crucial

VXDAS Strives to Provide A Hassle-Free Purchasing Journey

Money Back Guarantee

Invest in our equipment with absolute confidence, backed by our satisfaction guarantee.

1 Year Warranty

Our dedicated team provides timely assistance,
committed to addressing your queries.

Customers Services

Our dedicated team provides timely assistance,
committed to addressing your queries.

Recently Viewed Products